Ufuna izisombululo zeenaliti ezikhethekileyo okanye izinto ezintsha kwizixhobo zonyango?

Khetha i-MEKON ukuze ufumane ubuchule obukhethekileyo!

IShanghai Mekon Medical Devices Co., Ltd. izinikele ekuboneleleni ngezisombululo ezenzelwe wena kwiindidi ezahlukeneyo zeenaliti zonyango ezikhethekileyo, ii-cannula, iimveliso zesinyithi zonyango ezichanekileyo, kunye nezinto ezahlukeneyo ezisetyenziswayo zonyango ezenzelwe ngokukodwa iinaliti kunye nee-cannula. Singoochwephesha kwicandelo lokuvelisa iinaliti kwaye saziwa njengababoneleli bezisombululo ezipheleleyo, sinceda umthengi ukuba ayile kwaye enze imveliso ukusuka kwintsimbi ukuya ekugqibeleni.

Inkqubo yethu epheleleyo yemveliso ibandakanya ukuwelda iityhubhu, ukuzoba iityhubhu, umatshini wokulungisa, ukucoca, ukupakishwa, kunye nokubulala iintsholongwane. Sisebenzisa izixhobo eziphambili ezingeniswe eJapan nase-United States ukuqinisekisa umgangatho kunye nozinzo lwemveliso yethu. Ukongeza, siphuhlise izixhobo zokucubungula ezikhethekileyo ukuhlangabezana neemfuno zemveliso ezikhethekileyo zabathengi bethu.

Singaphuhlisa size sivelise iinaliti ezenziwe ngokwezifiso okanye izinto ezifanayo zentsimbi ezenzelwe ukuhlangabezana neemfuno ezithile zokusebenza kwesixhobo sakho sezonyango ngokusekelwe kwimizobo okanye kwiisampulu zakho. Qhagamshelana nathi namhlanje ukuze ufunde okungakumbi!

Qhagamshelana nathi

1-14

A. Izinto ezisetyenziswayo:

Intsimbi engenasici 304, 304L, 316, 316L, njl.

I-Nitinol

B. Ubukhulu betyhubhu:

Uluhlu lobungakanani: 7 - 35 Gauge

Ubukhulu bodonga: RW, TW, ETW, UTW

Ubude: Ukuya kuthi ga kwi-2250mm

Ii-OAL tolerances eziqhelekileyo ziyi-+/- 0.020" (+/- 0.5mm), kodwa ii-tolerances eziqinileyo aziyongxaki.

C. Ukugqitywa komphezulu wetyhubhu:

Bula ngaphakathi nangaphandle kwetyhubhu, okanye naluphi na unyango lomphezulu ngokwemfuno yakho ethile

D. Ubunzima beTube

Cela uluhlu kwiVickers ukuba isicelo sakho siyafuna. Ukuba asikhankanywanga, ityhubhu eqhelekileyo yi-¾ - full hard.

Ubunzima bomphezulu wetyhubhu ye-E.:

I-ISPG isebenzisa i-roughness average (Ra) nge-micro intshi nganye okanye i-micron ukulinganisa i-surface roughness ye-cannula.

F. Ubude beBevel:

Bhekisela kubude be-bevel iyonke ukuba kuyimfuneko.

G. Iinotshi okanye iiHole:

Ukuba kuyimfuneko, ubude nobunzulu benotshi yesingqisho kunye nobubanzi bomngxuma. Ukuba kukho irediyasi efunekayo, nceda ucacise. Indawo yomngxuma/inotshi yesingqisho ukusuka esiphelweni sempundu.

2-4